Air Compressor

Best Air Compressors For Power Tools (To use in 2019)

Share To Remember!

Best Air Compressor For Power ToolsQuick Question: If you have a pneumatic sander, air powered hammer, brad mailer and a nail gun, what tool are you missing? An air compressor to power them.

Just like every mechanic owns a toolbox, every workshop should have a heavy-duty air compressor. When I was starting out as a workman, there weren’t as many air-powered tools and air compressors were unheard of then.

These days, there are so many compressors that you need a buying guide for the best air compressor for power tools. I have used these air compressors and here’s why I loved them.

Top 5 Best Air Compressors For Power Tools in 2019

1. Campbell Hausfeld DC080500 Compressor

Campbell Hausfeld DC040500 Air CompressorIf your workshop is situated in a residential area with controlled noise levels, you will never go wrong with this hotdog-style compressor from Campbell.

Often referred to as the best ”wheelbarrow compressor”, you will be amazed that this compressor pumps up to 90 PSI while emitting just 68dBA of noise. This is 75% lower than the noise produced by other compressors for power tools. What’s it best at? Painting, general home repairs and running light drills.

This quiet compressor, in fact, gives up to three times more pumping time compared to other similarly-priced compressors. The oil-free induction motor is durable ensuring that the operator completes projects on time even when running multiple power tools simultaneously.

Instead of running on a single large pump, the engineers behind it opted for twin smaller pumps instead. In addition to being maintenance free, they’re so quiet that you will (certainly) forget that the air compressor is working.

Features & Pros:

  • Unparalleled working performance
  • Suitable for both small and large scale uses
  • Twin Pumps
  • Durable 8-gallon tank

Cons:

  • Cannot be used during winter

2. PORTER-CABLE C2002 Pancake Compressor

Porter Cable C2002 Oil Free UMC Pancake Compressor ReviewThe best air compressor for power tools should be stable and efficient. This brick-red, round-base air compressor is no exception to this rule;

When you need to power heavy-duty air tools at a construction site or in a busy workshop, the Porter Cable C2002 will never let you down. Its sturdy 6-gallon cast iron tank is filled by an efficient oil-less pump powered by a 0.8 Horsepower motor.

Even though power tools rarely require more than 75 PSI, this compressor can provide up to 150 PSI from its tank (if need be). Boasting the right balance between a long run time and quick recovery, it will give you maximum productivity even on the most demanding of tasks.

Features & Pros:

  • Affordable
  • Efficient, durable motor
  • 6-gallon tank
  • It’s 0.8 Horse Power pump starts even in cold weather.

Cons:

  • Cannot run continuously for long durations

3. Bostitch BTFP02012 Compressor

Bostitch BTFP02012 6 Gallon 150 PSI Oil Free Compressor ReviewI never thought that you could get much power from a budget maintenance free compressor before using the Bostitch BTFP02012. Though designed for professional industrial use, this air compressor is still the best air compressor for power tools when you need to perform minor home fixes.

There are two couplers and regulators attached to its 6-gallon tank ensuring that two power tools can be powered by it at a go. This is more practical when you need to double productivity by seeking a helping hand.

It’s 80 dBA producing pump falls on the higher side of the noise scale. Though you won’t need earmuffs, it will be audible to neighbours in close proximity. The 120 Volts low current motor uses induction coils and it will start effortlessly even in cold winter weather: You’ll just need a long power extension cord.

Features & Pros:

  • Non-Slip rubber base
  • Light (30lbs)
  • Large regulator gauge
  • Supports two power tools at a go

Cons:

  • Noisy

4. Makita MAC700 Big Bore 2.0

Makita MAC700 Big Bore HP Air Compressor ReviewWhile this clearly isn’t the most aesthetically pleasing compressor you will ever set your eyes on, it will be the best air compressor for power tools when you need to get a lot of work done in a short amount of time.

The large lateral tank makes this miniature beast an excellent choice for powering medium to heavy-duty power tools.

Being its biggest selling point the huge bore ensures that it’s the air compressor with the least recovery time in the market. Makita MAC700’s piston pump is inspired by an automobile engine and is lubricated for faster recovery while minimizing noise.

When running at 1700 rotations per minute, the motor stays cool without compromising on the compressor’s 130 PSI output. With its low current motor circuit, the Makita MAC700 will neither fail to start in cold weather nor trip circuit breakers.

Features & Pros:

  • Lower power consumption
  • Faster recovery
  • Powerful, durable tank

Cons:

  • The manufacturer’s manual isn’t detailed.

5. Rolair FC2002 2 Compressor

We rarely see twin-tank air compressors: When we do, they never disappoint. Looking at the Rolair FC2002, we can see that it does a great job powering heavy duty nail guns and air drills. The ball-bearing supported valves are made to last a lifetime.

It’s 4.3 twin cast iron tanks are filled by a pump powered by a 2 Horse Power industry Grade motor. Even at 90 PSI, the tanks still produce 4 CFM.

The compressor’s safety is never compromised even when working with double reserve tanks. Its oil lubricated pump comes installed with an overload protector preventing it from overheating. Next to its pressure switch, there’s a reset switch that’s flipped when you need to run on eco-mode through standard household outlets.

Features & Pros:

  • Unique design
  • Durable Pump
  • Maintenance free

Cons:

  • Loud (80dBA)

Frequently asked questions

What compressor size will you need to run most air tools?

This will depend on the types of projects you will be undertaking. A small compressor will be of no use in a large fabrication warehouse but it will be of great help to a hobbyist performing minor household repairs.

Again, sandblasters need to be powered by large compressors while hand-held airbrushes work with just about any compressor. If you will be spending most of your time outdoors on the move, you need a small compressor that’s portable.

Related Reviews: 

Best air compressor for painting furniture
Best Air Compressor for Brad Nailer

About the author

Avatar

Shamim Hasan

I am the founder of Globo Gears, a digital nomad, and a passionate content creator. It is depressing when you won't find your desired information quickly. I know the pain, and I love researching a lot for making things decorated. Traveling and exploring natural beauties are my hobbies.

Leave a Comment

CommentLuv badge

shares